Hotline / WhatsApp / Zalo +84 937 639 365 Email [email protected] Company profile VIEN中文
Truong Viet Logistics logoTRUONG VIET LOGISTICSFASTER & SMARTER Get a quote
← Blog

Regulations – 22/11/2026 – Truong Van Viet

Vietnam Circular 85/2026 on Goods Classification: Key Points

From 15 Sept 2026, Circular 85/2026/TT-BTC replaces Circular 14/2015 on goods classification. These are the provisions importers deal with directly.

Circular 85/2026/TT-BTC regulates goods classification and analysis for the classification of exported and imported goods. It was signed on 30 June 2026 and takes effect from 15 September 2026, replacing Circular 14/2015/TT-BTC and Circular 17/2021/TT-BTC. Any old document or official letter that cites these two circulars must now be read again against the new one.

Below are the provisions importers will deal with directly when declaring HS codes or when customs takes samples.

1. Scope: focused on classification

The old Circular 14/2015 covered both classification and analysis for quality inspection and food safety inspection. Article 1 of Circular 85/2026 sets the scope as classification, analysis for classification and the database of the List. The circular's title no longer mentions quality inspection or food safety as Circular 14/2015 did, but the "inspection and assessment of technical criteria" of goods is still mentioned in Article 10 and Article 12.

2. Classification principles stay the same

Article 4 restates: each item has only one code. Classification must comply with the Customs Law, Vietnam's List of Exported and Imported Goods, the tariff schedules and the 6 General Rules for the Interpretation of the HS. People used to classifying the old way do not have to relearn from scratch.

3. Order of reference materials when a code still cannot be determined

Article 6, Clause 1 provides that when applying the principles above still does not yield a single code, the following are used:

- The Explanatory Notes to the HS Nomenclature.
- The WCO Compendium of Classification Opinions.
- The Supplementary Explanatory Notes to the AHTN.
- The database of Vietnam's List of Exported and Imported Goods.

If the description in Vietnam's List differs from the HS or AHTN Nomenclature, the HS or AHTN description applies directly (Clause 2). If there is still not enough basis, standards and technical regulations of competent authorities may be used to determine the name and description of the goods (Clause 3).

4. Specialised code differs from customs code: follow the customs code

This is a point importers of medical goods, cosmetics and food should remember well. Clause 4, Article 6 provides: where goods have a code in a specialised management list that differs from the code determined under the List of Exported and Imported Goods, the List of Exported and Imported Goods and customs law prevail.

In short: a code in a line ministry's circular tells you whether the goods need inspection, but for the declaration you must classify again under the customs List.

5. Guidance documents on classifying complex items apply from the date of issue

For complex items, the Director General of the Customs Department may issue documents amending or guiding classification based on the opinions of line ministries, the WCO HS Committee or the ASEAN technical group. Clause 5, Article 6 provides that where such a document affects an enterprise's declared code or tax rate, classification follows the document from the date it is issued.

6. Composite machines and dismantled machines: registering the List

Article 7: composite machines and functional units of machines under Chapters 84, 85 and 90 arriving in several shipments (from one or several sources) may be classified, at the declarant's choice, either machine by machine or under Notes 3, 4 and 5 of Section XVI. Article 8 provides that unassembled or dismantled machines are classified under Rule 2(a), that is, as complete machines.

If the goods arrive in several shipments (from one or several sources, cleared at one or several places) and the declarant chooses to classify under Notes 3, 4 and 5 of Section XVI, a List together with a deduction tracking sheet must be registered before the declaration for the first shipment (Article 9). Customs confirms within 3 working days. We explain the details in a separate article on dismantled machinery imported in several shipments.

7. When samples are taken for analysis

Articles 11 and 12 provide:

- The declarant must present the goods for customs to take samples. Samples are taken from the shipment itself, witnessed by the declarant's representative, who signs to confirm, and each sample is sealed.
- If the declarant is absent, customs still takes samples, witnessed by the port, warehouse or carrier. So it is best to be present when notified of sampling.
- 2 samples are taken. If the shipment consists of only 1 unit, no sample is taken.
- Samples are kept for 120 days from the date of the results notice.
- Do not ask for the sample back if you still intend to file a complaint: taking the sample back within the retention period is treated as accepting the result.
- The notice of analysis and classification results is issued within 5 working days of receiving the full dossier and samples. For complex samples, no more than 20 working days.
- If a line ministry or the WCO must be consulted, or verification done at the place of manufacture, the notice is issued within 5 working days of the reply. If the sample is sent for external assessment, within 5–8 working days of the assessment result.
- Results notices are published on the Customs Department's website, except for the appendices.
- If you disagree with the result, file a complaint under the Law on Complaints or request an assessment under Article 30 of Decree 08/2015/NĐ-CP.

Article 3, Clause 3 also allows the declarant to use assessment services or look up the List database to determine the composition, properties and use of the goods, and to take responsibility for the documents they provide.

8. Transition

Under Article 16:

- Shipments sampled before 15 September 2026 without results yet follow the document in force at the time the declaration was registered.
- Lists of composite machines, functional units and loose components registered before 15 September 2026 continue under Circular 14/2015 until fully imported.

Our experience

Customs has previously replied in official letters that anyone asking about a code must send full technical specifications, and incomplete requests will not be answered. That spirit still holds under Circular 85. The analysis request dossier has a section for technical documents and composition tables. Enterprises that provide full documents from the start get faster classification with fewer disputes.

For customers importing goods whose code can be read more than one way, we attach the catalogue and composition table when filing the declaration, without waiting for customs to ask. For medical goods and cosmetics, we always look up the code under the customs List first, then cross-check against the line ministry's list, exactly as Clause 4, Article 6 provides.

Legal basis

- Circular 85/2026/TT-BTC dated 30 June 2026 on goods classification and analysis for the classification of exported and imported goods, effective 15 September 2026, replacing Circular 14/2015/TT-BTC and Circular 17/2021/TT-BTC (Article 15). Articles cited: Articles 1, 3, 4, 6, 7, 8, 9, 10, 11, 12, 16. Official Gazette No. 409, 18 July 2026: https://congbao.chinhphu.vn/van-ban/thong-tu-so-85-2026-tt-btc-469982.htm
- Customs Law 54/2014/QH13 (consolidated text 54/VBHN-VPQH of 2026), Article 26 on goods classification. https://datafiles.chinhphu.vn/cpp/files/vbpq/2026/3/54-vbhn-vpqh.pdf

Is customs questioning the code of your goods or taking samples? Send the declaration and catalogue to [email protected] or WhatsApp/Zalo +84 937 639 365. We will review it, suggest how to handle it and send a quote within 2 business hours.

Does this affect your shipment? Send us your documents and we will check and quote within 2 business hours.

Get a quote
Get quote Facebook ZaloZalo +84 937 639 365 Call +84 937 639 365